What is Repiping?

We all know you are wondering what most people ask, what is repiping? To answer, it’s the procedure of replacing the supply pipes in a dwelling or business. The common misconception is that it’s just replacing the short section of the pipe, but you’re wrong. Repiping defines the complete replacement of the whole plumbing system.

There are endless factors as to why repiping is necessary. To name a few, reduced water flows, leaks, rusty colored water or low pressure from corrosion of pipes. It’s highly suggested to repipe prior to starting improvements in a remodel, or if you plan on repainting the exterior of your home.

The Process

Repiping is the task of installing new copper repipe system. The procedure typically involves the removal of accessible pipes and followed by the installation of a brand new plumbing system.

The procedure includes the installation of new USA made type L hard copper, professionally secured and strapped, stainless steel water supply system, and kwik ¼  installation. Once the installation is complete with running water, the water pressure is tested and flushed out. The duration of the repiping process takes on average between one-to-three days. Following completion, wall patching may be needed.

Standard Repiping

A proper inspection on site by the professionals at Repipe1 is very important for a successful repiping process. A conventional repiping incorporates the installation new cold and warm domestic water pipes from the water origin to all of the existing fixtures and faucets. Fixtures and drain replacement are included as apart of the proposal, unless otherwise stated.

Materials

The various materials used in repiping, and indoor systems are metals, and occasionally plastic. Metal pipes are galvanized steel or copper, iron, and brass. Plastic piping being used are chlorine poly vinyl chloride, kitec, polybutylene, cpvc, polyethylene pe, and polyvinyl chloride. You may run into issues because the fittings that are poorly made from companies who lack quality control overseas. More commonly, poly vinyl chloride cpvc is recommended where water PH levels are an issue.

An alternative: Sandblasting

If the standard repiping option doesn’t suit you, you can opt to sandblast the inside of worn thin piping and painting the interior of the old pipe with epoxy paint. In addition, a few of the thin spots may leak immediately days/ weeks later. Eventually the leaking pipes that are epoxy coated will need to professionally repiped by installing cda copper repipe.

 

Leave a Reply

Your email address will not be published. Required fields are marked *